DCS C-24 Betriebsanweisung PDF herunterladen (Seite 3)

2” x 4”

PARTS SUPPLIED

Clamp (1)

Wire clip (2)

Phillips

16 mm

screws (9)

Drain hose

support (1)

Moisture protection

tape (1)

(to prevent moisture

damage)

Drain hose

joiner (1)

Top

mounting

brackets (2)

Side mounting

bracket kit

(A and B) (2)

OPTIONAL

Preﬁnished toekick (1)

white or black

Rubber

washer for

inlet hose

(1)

Edge protector (1)

(if services hole

partition is metal)

If the Drain hose(s) supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hose(s) by 11’ 10” (3.6 m). The kit is available from the nearest

DCS Authorized Service Agent, or Toll free 1.888.936.7872 or www.dcsappliances.com.

Hexagonal

socket (2)

(long & short)

Important!

Be sure the edges of the services hole are smooth or covered. If the services

hole is through a metal partition the hole must be protected with the Edge

protector supplied to prevent damage to the power cord or hoses.

These marks indicate mounting bracket screw locations

Preferred position. If adequate clearance, services hole can be

higher to clear toekick space.

If hole is higher, ensure drain hose(s) are routed straight into the

waste connection.

Water Connection

Recommended HOT (Maximum 140°F/60°C).

Supplied hose to suit 3/8” (9 mm) male compression tting.

110-120 VAC

max. 15 A

Note: Services can be located

either side of DishDrawer®.

max. ø

1 ½ ”

(

38 mm)

min.

7 ”

(

200 mm)

(

10 mm)

max.

17 ”

(

450 mm)

If no side partition, use a

brace for securing.

CAVITY PREPARATION

Water Pressure Max Min

Water softener models 1 MPa (145 psi) 0.1 MPa (14.5 psi)

Other models 1 MPa (145 psi) 0.03 MPa (4.3 psi)

Drains will need to be separated to satisfy kosher requirements. We suggest you conrm

acceptability with your local rabbi in respect to kosher installations.

Max. distance of

hoses and cord from

chassis edge

Left hand

side

ight hand

side

Drain hose

78 ½ ”

(2000 mm)

70 ½ ”

(1800 mm)

Inlet hose

64 ¾ ”

(1650 mm)

49”

(1250 mm)

Power cord (excl. plug)

29 ½ ”

(750 mm)

27 ½ ”

(700 mm)

Left hand

side

Right hand

side

Water supply

Moisture

protection

tape must

be applied.

1 2 3 4 5 6 7 8 9

Kommentare zu diesen Handbüchern

Keine Kommentare

DCS C-24 Betriebsanweisung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Herde DCS C-24