DCS LCD 12B Betriebsanweisung PDF herunterladen (Seite 12)

PROGRAM SYSTEM SPEED DIAL

NUMBERS

The system list starts with 200 numbers and can be increased in blocks of ten.

The maximum amount is 500 numbers if no more than 1000 station speed dial

numbers are assigned. See your service company to increase or decrease the

system list.

The speed dial codes are 500–999. Each speed dial number consists of a line

access code and the telephone number to be dialed. The access code can be

any line group, individual line, station group or individual extension. The speed

dial number can be up to 18 characters long including ✱, #, FLASH and PAUSE.

NOTE: If Least Cost Routing (LCR) is being used, the LCR access code must

be entered.

When you are entering a speed dial number, there are some special keys that

you will need to use. These are the bottom row of programmable keys on the

LCD 12B and LCD 24B keysets and are known as keys A, B, C, D, E and F.

PROGRAM KEYS

UP & DOWN - Select the speed dial bin.

KEYPAD - Used to enter number.

HOLD - Press to clear entry.

SPK/RLS - Save data and advance to next program.

A - Does not have a function.

B - Inserts a FLASH.

C - Inserts a PAUSE.

D - Changes the dialing type from pulse to tone.

E - Hides and displays digits.

F - Changes display to speed dial name entry.

ABCDEF

24 BUTTON KEYSET

PROGRAMMABLE KEYS

LAYOUT

12 BUTTON KEYSET

PROGRAMMABLE KEYS

LAYOUT

ABC

Open customer programming and follow the instructions below.

ACTION DISPLAY

1. Press TRSF and then dial 705 SYS SPEED DIAL

Display shows the first number 500:

2. Dial the speed bin desired (e.g., 505) OR SYS SPEED DIAL

press UP or DOWN to choose and 505:

press the right soft key to move the cursor

3. Enter the access code (e.g., 9—the system SYS SPEED DIAL

will automatically insert a dash) followed by 505:9–121223456789

the phone number (up to 18 digits long)

and press the right soft key to return to

step 2

4. Press the F key to toggle to

Program

SYS SPEED NAME

System Speed Dial Names

, step 3 to 505:

enter the name

5. Press TRSF to store and exit

programming OR press SPK to store

and advance to the next program

DEFAULT DATA: NO SPEED NUMBERS ASSIGNED

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

DCS LCD 12B Betriebsanweisung Seite 12

Kommentare zu diesen Handbüchern