DCS MOTTK-30-SS Installationshandbuch PDF herunterladen

MODEL MOTTK30 TRADITIONAL MICROWAVE TRIM KIT

INSTALLATION INSTRUCTIONS

Installing Trim Kit

1. Cut opening in the cabinet face per the following dimensions:

Heigh

t: 17”+ 1/16”

, –0

Width: 24-3/4”+ 1/16”, –0

Note: Refer to diagram on the following page. The minimum

cabinet depth is 20”. When installing the Microwave and

Trim Kit in combination with a Wall Oven or Warming

Drawer, please follow the recommendations in the

Microwave Installation/ Use & Care Manual.

2. Add adequate platform base support in the bottom of the

cabinet for trim kit base to rest on.

3. Mark a centerline on the front edge of the cabinet bottom

(Fig. 01).

4. Place trim kit base and align centerline mark to the triangular

notch on the front edge of the base (Fig. 02).

5. Drill 1/8”pilot holes in the cabinet using the base as a

template and install a screw through the base into the cabinet

bottom to prevent the base from shifting (Fig. 03).

6. Insert Microwave into opening on top of the base. The

icrowave feet should sit in the recesses on the base for

t alignment. The Microwave should be plugged in at

this point.

Before you begin, read these instructions completely and carefully.

Getting Started

■ Remove packaging

Contents Tools Required

Part Description Qty

Trim Assembly 1

Base 1

Mounting Bracket (L/R) 2

Sheet Metal Screws 10

Fig. 01

Fig. 02

Fig. 03

1/8”Drill

#2 Phillip Screwdriver

1 2 3 4

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

MODEL MOTTK30 TRADITIONAL MICROWAVE TRIM KITINSTALLATION INSTRUCTIONS Installing Trim Kit1. Cut opening in the cabinet face per the following dimensio

Seite 2 - 1/16"

1/16"Fig. 057. Place the right and left mounting bracket supports by resting the bottom edges of the supports on thebottom of the cutout (Fig 04)

Seite 3 - Stainless Steel Care

Stainless Steel CareThis Trim Kit is made of stainless steel. Use the mildest cleaning procedure first. Start with hot soapy water,rinse and dry. I

Seite 4 - P/N 241186 Rev. B 02/09

5800 Skylab Road, Huntington Beach, CA 92647 Tel: 714.372.7000 • Fax: 714.372.7001 Customer Service: 888.936.7872www.dcsappliances.c

Weitere Dokumente für Nein DCS MOTTK-30-SS

Um das Dokument anzuzeigen DCS MOTTK-30-SS Installationshandbuch

DCS MOTTK-30-SS Installationshandbuch (4 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

DCS MOTTK-30-SS Installationshandbuch

Stöbern Sie online oder laden Sie Installationshandbuch nach Nein DCS MOTTK-30-SS herunter. DCS MOTTK-30-SS MOTTK30 Installation Instructions Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Nein DCS MOTTK-30-SS

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein DCS MOTTK-30-SS