DCS C-24 Spezifikationen PDF herunterladen (Seite 12)

Chapter 3: Rack Mounting the Switch

3.2.2 Assembling the Rails onto the Equipment Rack

The rails attach to the rear rack posts to support the switch. Before attaching the rails to the rack posts,

verify that, when the switch is mounted, the distance between the bracket flanges and rail flanges does

not exceed 30 inches, as shown in Figure 11.

To attach the rails to the rear rack post, perform this procedure:

Step 1 Select mounting screws that fit your equipment rack. Each rail requires two screws.

Step 2 Attach the rails to the rear rack posts, as shown in Figure 12.

Figure 11: Maximum Bracket-Rail Span

Figure 12: Attaching the Rails, as viewed from Rear of Rack

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Keine Kommentare

DCS C-24 Spezifikationen Seite 12